About us - The Work Shop

TiTAN is in-house "custom built" and have the facility to machine anything for any car.

Our Suspension Basic specifications are: -   Inverted   Mono Tubed   Tube strength – gas pressure tested up to 1000 psi stability   Around 80% oil filled – fully synthetic   Oil type varies depending on requirements   Around 20% gas – high pressurized also known as “high charge”   Gas type “Nitrogen” – vacuum before insertion   Gas pressure varies between 200 psi to 500 psi   Gas pressure specification differs from person to person or case to case, depends on requirements     Valving – large surface area – non disclosure   Bush – Teflon – double or more – non disclosure   Seals – double or more – non disclosure   Coil spring rates – LINEAR (always) between 2.5 kg/mm to 5kg/mm at around 0.5 kg/mm intervals   Coil spring rates – higher figures are available

<<Short Clip VIDEO>> Facade of MPD Auto Centre S/B	<<Short Clip VIDEO >>The Birthplace of the Absorbers
The front facade of where the Titan Absorber lives.	This is where the magic is put into the steel.
Wai long here learning from the master ( his father ) Richard how to build a better and stronger TiTAN absorber.	TiTANs' Customers. Waiting for a tune up ~!
The new source of Springs to support the Absorbers.	The workshop in action ~! A worker grinding one of the shafts into shape.
This is where all the calculations are done reseach after research just to get the fine tuning you want.	The legacy goes on, here are the old spring stocks which are stored.
Click here to discuss about your TiTAN expereince.